Fiberboard

packrite_logo.png

Corrugated Box Styles


RSC

All flaps have the same length, and the two outer flaps (normally the lengthwise flaps) are one-half the container's width, so that they meet at the center of the box when folded.





HSC*
All flaps have the same length, and the two outer flaps (normally the lengthwise flaps) are one-half the container's width, so that they meet at the center of the box when folded. HSC has flaps on the top or bottom only.

* Cover is optional




FOL
All flaps have the same length (the width of the box). When closed, the outer flaps come within one inch of complete overlap. This style is especially resistant to rough handling.




OPF
One piece of board is cut so that it provides a flat bottom, with flaps forming the sides and ends, and extensions of the side flaps meeting to form the top. Not for Triple Wall.


FTC-SAMPLE-1_600x600.jpg

FTC

The two-piece box is made from two scored and slotted blanks (trays).

The FTC also can be produced with an optional sleeve that forms the body. The two interchangeable covers can be shipped either flat or set up to the user for final assembly. The style is frequently used for tall or heavy products that would be difficult to lower into
a box. The item is placed on the bottom cover, and the tube is lowered over the product.